Capacity: 3400 lbs./hr. at 161 RPMs; Depending on product density
Screw Diameter: 76mm
Screw Type: Open Helix with 76 mm pitch
Screw Discharge length: 8 -12 Inch
Is not recommend for these feeder to run pellets with the current helix and nozzle, they are all set up for feeding powders. We recommend customer to purchase new helix direct from Schenker/Accurate with end stubs and nozzles with the end bearings. If feeders are tu run mixed powder with pellets (depending of percentage of powder) is possible for existing screws to work with current set up.